Ask a Trooper: Can drivers use bright lights on the Interstate
By Jesse Grabow
Minnesota State Trooper
Question: What are the rules regarding using your brights while on the interstate?
Answer: This is what Minnesota State Statute says: 169.61 COMPOSITE BEAM.
(a) When a motor vehicle is being operated on a highway or shoulder ADJACENT thereto during the times when lighted lamps on vehicles are required in this chapter, the driver shall use a distribution of light, or composite beam, directed high enough and of sufficient intensity to reveal persons and vehicles at a safe distance in advance of the vehicle, subject to the following requirements and limitations.
(b) When the driver of a vehicle approaches a vehicle within 1,000 feet, such driver shall use a distribution of light, or composite beam, so aimed that the glaring rays are not projected into the eyes of the oncoming driver.
(c) When the driver of a vehicle follows another vehicle within 200 feet to the rear
So what this means is whether the road is a two-lane or a divided road such as a four-lane separated by a median or other barrier, a person still needs to dim for oncoming traffic with 1,000 feet.
This would also apply to traffic on frontage roads according to the definitions of adjacent:
1. Adjacent - nearest in space or position; immediately adjoining without intervening space.
2. Adjacent - having a common boundary or edge; abutting; touching.
3. Adjacent - near or close to but not necessarily touching.
If you have any questions concerning traffic related laws or issues in Minnesota, send your questions to Trp. Jesse Grabow – Minnesota State Patrol at 1000 Highway 10 West, Detroit Lakes, MN 56501-2205.
You can follow him on Twitter @MSPPIO_NW or reach him at firstname.lastname@example.org.